We have been producing the Aquavalve for many years. The success of the Aquavalve and positive response from the marine industry led our design team to develop the Electronic Aquavalve, which has become a problem solver for many modern marine plumbing installations.
The Electronic Aquavalve allows the diverting valve to be operated with the push of a button on the supplied control panel. The indicators on the control panel show the current position of the valve. The valve has two positions 'holding tank' or 'overboard'.
Download Info Sheet
- Electronic activation of the Aquavalve from included control panel
- Clear indication on control panel as to current valve position
- Versatility of installation with a vast range of hose and bend adaptors
- Compatible with Manual Aquavalve adaptors
- Stainless steel fastenings
- Each valve seal tested to check no o’ring leakage
- Valves are individually tested on assembly to 10 PSI
Frequently Asked Questions
InstallationThe Tru-Design Aquavalve is the most versatile valve on the market today. Full installation instructions are supplied with each Aquavalve. A large range of Tails is available to suit individual plumbing layouts, and piping sizes. When combined with the seals supplied, fittings can be oriented to suit the confined spaces encountered in marine plumbing. For the full range of Aquavalve Accessories, download the Product Info Sheet.
ServicingThe Electronic Aquavalve is supplied with full servicing instructions. It is recommended that the seal is greased regularly with Silicone grease which is available in an appropriate sized pack. If a major service is required, a service kit is available. The service kit includes grease and seals. Red and Blue Seals are used to alter the orientation of the 90° and 120° fittings (the Blue Seal is thicker). These are available if plumbing layouts need to be changed in the future. The spanner can often be misplaced, so when changing plumbing layouts etc, a new spanner can be supplied.
Should I mount the Electronic Aquavalve above the water line ?YES If the Electronic Aquavalve is mounted above the water line the valve will drain out therefore there is less buildup on the internal seal from the salt water that would continually sit in the valve if mounted below the water line.
Aquavalve Electronic 12V + Panel
Aquavalve Electronic 24V + Panel