Monitored Ball Valve
Designed and made in New Zealand for use in marine applications above and below the waterline, our Ball Valves are IMCI and Bureau Veritas approved to ISO standard 9093-2. They also comply with ABYC H-27 standards. They are ideal for controlling inlet and outlet water requirements.
Position Monitoring allows remote monitoring of Ball Valve Position. The Position Monitoring circuit can also be used as part of an engine or generator start interlock to ensure these don’t start without cooling water available.
The body of the Ball Valve is manufactured in glass-reinforced nylon composite with high impact and tensile strength resulting in a light weight unit, free from corrosion and electrolysis issues. The ball and sealing rings utilise a PTFE polymer to ensure a smooth action, and continuous ease of operation over many years. The Ball Valve is available in both BSP and NPS Parallel thread forms and can be locked in the closed position for use on toilet waste outlets.
Download Info Sheet
- Manufactured from a glass-reinforced nylon composite - High strength and light weight
- Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion
- Chemical resistant - Impervious to diesel, petrol and antifouling paints
- UV resistant - Will not degrade or discolour with ultraviolet light from the sun
- Large operating temperature range -20° to 100°C - for Ball Valve only
- Position Monitored - Able to be used as an engine interlock. Monitoring of multiple Ball Valve positions through the Panel Display
- Standards approved through IMCI & Bureau VERITAS to ISO standard 9093-2 when used with TruDesign Skin Fittings
- Comply with ABYC H-27 when used in conjunction with TruDesign ABYC collar and Skin Fittings
Frequently Asked Questions
Identification of threads BSP or NPS ?
Tru-Design manufacture these marine fittings with two types of threads: BSP British Standard Pipe for the European market. NPS National pipe straight for the US market. Each threaded fitting wi...
Do TruDesign Ball Valves require lubrication ?
No. The TruDesign ball valves are manufactured with a Teflon impregnated Ball running on Teflon rings, so no lubrication is required. It is good practice to turn the valve handle every few months...
What sealant can I use on TruDesign threads ?
Thread sealing options: - Standard Ceelon Thread tape - 3M 5200 - 3M 5200FT (fast cure) - Sikaflex 291i - Locktite 5331 - Arbokol 1000
Are TruDesign Skin Fittings certified ?
YES The TruDesign Skin Fittings (Thru Hulls) are compliant to ISO 9093-2 and certified by the International Marine Certification Institute (IMCI) and Bureau Veriitas. ABYC H-27. (American Boat...
Can I screw a tapered fitting into a TruDesign Ball Valve ?
NOT RECOMMENDED! The TruDesign Ball Valves have parallel threads and only fittings with parallel threads should be screwed into them. This is a very important issue as parallel threads allow for ...
What sealant should I use between a bronze or stainless skin fitting and a TruDesign ball valve ?
The same options as you would use for sealing any TruDesign composite fitting to a TruDesign composite Ball Valve: #3M 5200 #3M 5200 FT (Fastcure) # Sikaflex 291i # Loctite 55 Pipe Sealing ...
Can you fit TruDesign Ball Valves to bronze or Stainless skin fittings ?
Yes TruDesign Composite ball valves can be screwed onto an approved bronze skin fitting. First the thread on the bronze skin fitting must be identified to match the TruDesign Ball Valve (either ...
Are TruDesign Ball Valves approved / compliant to international standards?
YES TruDesign Ball Valves assembled with TruDesign Skin Fittings are compliant to ISO 9093-2 and certified by International Marine Certification Institute (IMCI) and Bureau Veritas. ABYC H27 ...
Can I run Petrol or Diesel through TruDesign fittings ?
YES and No TruDesign fittings (in both black and white) are suitable for contact with petrol & diesel fuels. NOTE: TruDesign Ball Valves, Aquavalves and Non-Return Valves should not be used in d...
BV Position Monitored 1 ½" BSP
BV Position Monitored 1 ¼" BSP
BV Position Monitored 1" BSP
BV Position Monitored ¾" BSP
BV Position Monitored ½" BSP
BV Position Monitored 2" BSP
BV Position Monitored ½" NPS
BV Position Monitored ¾" NPS
BV Position Monitored 1" NPS
BV Position Monitored 1 ¼" NPS
BV Position Monitored 1 ½" NPS
BV Position Monitored 2" NPS