T-Piece Connector 1½" BSP M-F-F

Join 2 or more together to create manifolds. Used individually for fresh water engine flush-out or for system antifreeze applications

C975cc6db7f28095ef16293536279e67 full

T-Piece Connector 1½" BSP M-F-F

The 1½" Threaded T-Piece features 2x Female threads and 1x Male thread enabling them to be joined together to create manifolds - useful for multiple hose connections to a single Ball Valve & Thru-hull fitting.
The centre female thread is shorter and designed for use with Aquavalve Tails (Straight, 90°, and 120°) giving the option of tail sizes from 19mm up to 38mm. The Plug, or Threaded Connector can also be used in the centre connection.
NOTE: all Aquavalve Tails that are used with the T-Piece do not face-seal using the Red or Blue washer as they do when used in Aquavalves. Instead, use a suitable thread sealant or PTFE tape to seal threads.
The 1½" Male and Female threads at each end are also parallel and are also designed to seal through the use of a suitable sealant or PTFE tape allowing any orientation of the two joined parts. Do not overtighten!


Download Info Sheet

Features

  • Manufactured from a glass reinforced nylon composite - High strength and light weight
  • Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion
  • Chemical resistant - Impervious to diesel, petrol and antifouling paints
  • UV resistant - Will not break down with ultraviolet light or discolour from the sun
  • High quality surface finish - Will not discolour with green film as similar bronze fittings do
  • Large operating temperature range - Suitable for all marine environments, from -20°C to +100°C

Frequently Asked Questions

Models

5b6e4d2950d1052a92625b6d3367feb6 grid
T Piece Connector 1½" Bsp M F F

90893

T-Piece Connector 1½" BSP M-F-F

105g / 3.7oz